Carpal Splints
High impact resistant polystyrene with reinforcement ribs to add structural integrity, reduce flexing, minimize breakage. Patented recess provides free circulation of air under pad, to reduce development of pressure necrosis. Central curvature allows limb to be placed in resting position.
Toy 7½" x 1" x 5/8" deep
Small 10" x 1 ¼" x 5/8" deep
Medium 12" x 1 ½" x 7/8" deep
Large 15" x 1 7/8" x 7/8" deep
X-Large 18" x 2" x 1" deep
Carpal Splint Set of 10, two of each

 

Quick Splints
The latest design in preformed splints for small animal use, it is made of high impact ABS plastic and is scored for individual sizing. Radiolucent. Excellent replacement for Thomas Schroeder splints. All splints come in a paired left and right leg set. Rear leg or tarsel splint (shaped to follow contour).
Front Set
Small
Medium
Large		 Rear Set
Small
Medium
Large

 

Foam Padded Plastic Splints
Made of strong, lightweight plastic; padded with non-irritating foam; can be contoured at distal end with addition of moderate heat; modified cutout for carpal pad. Radiolucent—will not interfere with x-ray while in place. Familiar green color.

Small 8" long 1" wide
Medium 12" long 1 ½" wide
Large 16" long 2" wide

 

3M Products
VETCAST
PLUS
Casting Tape
Good for difficult applications where light cast weight is important and extra strength is necessary. Quick curing time: 3–5 min. Comfortable. Tape is porous to reduce itching and odor. Water and urine resistant.
2" x 3 yds.    5 rolls per box
3" x 3 yds.    5 rolls per box
4" x 4 yds.    10 rolls per box
.5" x 4 yds.    10 rolls per box		 Synthetic
Stockinette

A porous, knit sleeve that sheds water and reduces maceration.
1" x 25 yds.    1 roll
2" x 25 yds.    1 roll
3" x 25 yds.    1 roll
4" x 25 yds.    1 roll		 Synthetic
Cast Padding

A water-shedding cast padding for general orthopedic use.
2" x 4 yds.    20 rolls per bag
3" x 4 yds.    20 rolls per bag
4" x 4 yds.    20 rolls per bag
6" x 4 yds.    20 rolls per bag

 

MILTEX

Veterinary Steinmann (IM) Pins
Pins feature precision ground trocar points produced from high quality stainless steel with a mirror finish. Each pin is individually packaged and protected in a clear cylinder.
Buy 12 Mix & Match and Receive a FREE Pin Gauge!

Double Trocar, partial threaded
 27-192 1/16" x 7"
27-193 5/64" x 7"
27-194 3/32" x 8"
27-195 7/64" x 8"
27-196 1/8" x 9"
27-197 9/64" x 9"
27-198 5/32" x 10"
27-199 3/16" x 12"
27-200 ¼" x 12"

Double Trocar, smooth
 27-182 1/16" x 7"
27-183 5/64" x 7"
27-184 3/32" x 8"
27-185 7/64" x 8"
27-186 1/8" x 9"
27-187 9/64" x 9"
27-188 5/32" x 10"
27-189 3/16" x 12"
27-190 ¼" x 12"